The Ford Kuga rear sensor Installation is quite involved and bumper removal is required to fit the sensors in the factory positions. We are able to carry out the work on site providing the weather is good and there is off-street parking! Not really a job that can be done in the rain. Installation timeRead more about Ford Kuga rear parking sensors supplied and fitted.[…]
Fleet tracker fitting for one of our oldest customer’s. We have been supplying The Day Group with fleet trackers for over 15 years now. All units are connected to engine idle feeds so the office know exactly when the engine is running unnecessarily, saving £1000’s on fuel costs. With over 120 vehicles serving many depotsRead more about Fleet tracking system for The Day Group.[…]
Entry level Thinkware F70 forward facing dash cam and fleet tracking installation into a Nissan NV250/Renault Kangoo. We sometimes get asked why we charge a two hour rate to fit a dash cam. It’s quite a common question as the only part of the installation that the customer sees is the camera on the frontRead more about Thinkware F70 and fleet tracking installation.[…]
A customer contacted us to install two Viofo A129’s into a BMW 630 Gran Coupe and Audi A3. The actual equipment was good quality and didn’t feel “cheap” like some camera’s on offer from online retailers. The hardwire power lead had a useful control box to set the “off” voltage to protect the car batteryRead more about Viofo A129 Dash Cam, a quick review from an installer’s point of view.[…]
When purchasing and unbranded radio off eBay etc please always check what cables it comes with. This product did not have any adaptors to fit the Peugeot 307 CC we we’re installing into so we had to supply an additional adaptor and an FM antenna adaptor. The Installation took just under three hours (it takesRead more about This customer purchased an unbranded DAB Android radio, which, to be fair worked quite well.[…]
Not much demand for these bluetooth hands free kits these days but we do have the experience to fit these systems as we’ve been fitting them for years.
This is quite a lengthy Installation requiring rear bumper removal. We ran the “beeper” to cab area to ensure the driver could here the beeps clearly. The “beeper” has a volume control as well so is adjustable for the driver.
To install correctly the rear bumper requires removal, we do this to ensure the perfect position of the sensor heads in the factory locations, this avoids the sensors “false alarming”. As this was a commercial vehicle we run the “beeper” to the cab area to ensure it can be heard okay. If it were installedRead more about 2019 Vauxhall Movano rear parking sensors supplied and installed in the Dover area.[…]
Offering a mobile fitting service for dash cams, parking sensors, vehicle trackers, engine Immobiliser’s, radio’s, reversing camera’s and much more in the Kent Coast area. Including, Folkestone, Hythe, Ashford, New Romney, Dymchurch, Lydd, Hastings, Canterbury, Whitstable, Herne Bay, Margate, Ramsgate, Sandwich, Dover and surrounding area’s.
Recently supplied and installed a Thinkware U1000 front and rear dash cam to a customer’s brand new Audi RS4 Avant. The owner was so impressed with our work that he asked us to remove the “dealer installed” dash cam from his wife’s Audi S3 (it was not great!) and fit a new Thinkware Q800 proRead more about Audi S3 Q800 front and rear dash camera[…]